Avantco Equipment 177SL713A Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco Equipment 177SL713A. Avantco Equipment 177SL713A 16 pages. Meat slicer
Également pour Avantco Equipment 177SL713A : Manuel de l'utilisateur (16 pages)
Imprimer la page
Fold a cloth wipe that has been submerged in fresh detergent solution and
1.
work it between the ring guard and the knife, starting at the base of the ring
guard. Carefully work the cloth around the knife, cleaning the edge of the ring
guard and edge of the gauge plate.
Sanitize and allow to dry.
2.
Clean the machine body with a damp
1.
cloth or a sponge rinsing frequently
with hot water and cleaning solution.
Rinse with hot water. Sanitize and let air
dry.
Clean also the gauge plate and
2.
the indexing knob. While doing this
operation pay attention to the knife.
Don't open the gauge plate or you risk
to be cut!
The components contained in the base do not need any special cleaning;
occasionally remove the dust that can accumulate in the end area of the carriage
and of the thickness plate regulation.
1. Make sure the sharpener knob at the base of the sharpener is loose
(about 10 turns).
2. Insert the sharpener as shown in the picture until it stops at its correct position
and screw the knob.
www.AvantcoEquipment.com
www.Avantco.com
User Manual
User Manual
9
9