CORNING LSE 6704 Manuel d'instruction - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CORNING LSE 6704. CORNING LSE 6704 12 pages. Platform rockers
Également pour CORNING LSE 6704 : Manuel d'instruction (8 pages)
Imprimer la page
1.0 General Specifications
Speed Settings
Timer
Motion
Tilt Angle
Maximum Load
Ambient operation Range
Dimensions
Weight
Electrical
Warranty
Platform Size
2.0 Safety Precautions
Do not use the rocker near water sources. Be sure that water does not
get on the device, especially during the cleaning procedures.
Do not expose the rocker to aggressive vapors (e .g ., organic solvents) .
Z Z
Do not insert any objects into the rocker (such as screwdriver or
Z Z
metal rods) .
Never operate the rocker without the platform securely attached .
Z Z
Hazardous samples should be shaken only in appropriate containment
Z Z
vessels .
1 . Switch on POWER
2 . Set SPEED potentiometer on desired value
3 . Set TIME potentiometer on desired value or on HOLD – continuous
function (yellow light next to HOLD will illuminate)
4 . Press START/STOP button to start rocking
5 . Press START/STOP button to stop rocking (HOLD position) . Device
automatically stops after the set time passes . Note: Pressing the
START/STOP button during operation will reset the timer .
Do not rock flammable or explosive samples!
4
C O R N I N G L S E P L AT F O R M R O C K E R S
5 to 120 tilts/minute
0 to 2 hours or continuous
Rocking
Fixed 7°
11 lbs ./5 kg
+4°C to 70°C
12 .8 x 14 .2 x 5 .7 in . (32 .5 x 36 x 14 .5 cm)
11 .7 lbs ./ 5 .3 kg
115V, 50/60Hz
230V, 50/60Hz
5 years
11 .8 x 11 .8 in . (30 x 30 cm)