CORNING LSE 6706 Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CORNING LSE 6706. CORNING LSE 6706 8 pages. Platform rockers
Également pour CORNING LSE 6706 : Manuel d'instruction (12 pages)

Imprimer la page

4.0 Operating Instructions

4.1 Controls

1. POWER switch: Turns the rocker ON (power switch illuminates) or OFF

2. SPEED knob: Sets the rocker speed

3. TIME knob: Sets the time of the rocker

4. HOLD yellow light: Illuminates when the rocker is set for continuous running

5. START/STOP button: START or STOP rocking

6. RUN green light: Illuminates when the rocker is running

4.2 Basic Operation

Switch on POWER.

Set SPEED knob on desired value.

Set TIME knob on desired value or on HOLD – continuous function (yellow light next to

HOLD will illuminate).

Press START/STOP button to start rocking.

Press START/STOP button to stop rocking (HOLD position). Device automatically stops after

the set time passes. Note: Pressing the START/STOP button during operation will reset the

timer.

5.0 Troubleshooting Guide

Be sure to disconnect the rocker from the main power source immediately in case of any signs

of malfunction and contact Corning Customer Service at 800.492.1110 or 978.442.2200.

Problem

Power switch does not light up

Rocker does not start

CO R N I N G L S E P L AT F O R M R O C K E R S

Solution

Check the power connection. Check the fuses.

Contact Corning Customer Service.

Check the power connection. Check the fuses.

Contact Corning Customer Service.