Garage Tek GT1005AE Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garage Tek GT1005AE. Garage Tek GT1005AE 7 pages. Wall cabinet, resin

Imprimer la page

WALL CABINET, RESIN ASSEMBLY INSTRUCTIONS

STEP #3:

A. SLIDE THE POSTS (L) INTO THE FOUR LOCATIONS SHOWN. SLIDE THE POST PAST THE BOTTOM OPENING ,

PLACE THE BOTTOM CAPS (D) ON THE POSTS AND PUSH INTO THE CABINET BOTTOM OPENING.

B. DOUBLE CHECK YOU HAVE INSTALLED THE POSTS INTO THE CORRECT OPENING SHOWN ABOVE.

STEP #4:

A. WITH THE CABINET ON A SOLID SURFACE, PRESS DOWN ON EACH CORNER AND PREDRILL A 1/16 OR 3/32

HOLE IN EACH LOCATION SHOWN AND THEN DRIVE A SCREW (N) INTO PLACE. REPEAT 3 TIMES ON EACH SIDE

OF THE CABINET.

B. LOCATE THE MOUNTING BRACKET (M) ON THE TOP CABINET BACK AND INSTALL THE REMAINING QTY 6,

SCREWS.

NOTE: PRESSING DOWN IN STEP 4A TAKES OUT ANY LOOSENESS OF FIT.

PG 3

QUESTIONS ???? CALL 1-866 664 2724

REV 1, 10/11