Garage Tek GT1006E Manuel d'instructions d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Garage Tek GT1006E. Garage Tek GT1006E 9 pages. Tall cabinet, resin - wall mount

Imprimer la page

STEP #8

STEP $9: ASSEMBLE THE 2 WALL BRACKET ASSEMBLIES AS SHOWN USING THE 2 SCREWS AND 2 SPEED

NUTS.

THE PURPOSE OF THE SPEED NUTS IS TO HOLD THE SCREW WHILE THE

WING NUT IS TIGTHENED INSIDE THE CABINET IN STEP # 13 BELOW.

STEP #10: PLACE THE CRADLE IN A TEKPANEL OR TEKTRAK SLOT AT THE DESIRED HEIGHT. PLACE THE

CABINET IN THE CRADLE AND PUSH IT TO THE WALL. LIFT THE CABINET AND SLIDE IT DOWN PAST THE

CRADLE SCREWS TO NOT DAMAGE THE CABINET.

STEP #10

STEP #11: INSTALL THE WALL BRACKETS IN THE TEKPANEL OR TEKTRAK 1 FOOT DOWN FROM THE TOP OF

THE CABINET AND APPROX 6" IN FROM THE SIDES.

PG 8

TALL CABINET, RESIN

QUESTIONS ???? CALL 1-866 664 2724

WALL MOUNT

ASSEMBLY INSTRUCTIONS

STEP #9

STEP #11

REV 1, 10/11