Makita 4300BV Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 4300BV. Makita 4300BV 12 pages.
Également pour Makita 4300BV : Manuel d'instruction (13 pages)
Imprimer la page
ENGLISH
SPECIFICATIONS
Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 92 dB (A)
Model
In wood at 90°
In wood at 45°
In steel at 90°
-1
)
Overall length
Net weight
Safety class
equipment
and
environmentally
compatible
4300BA
26 mm
55 mm
35 mm
6 mm
3,100
225 mm
2.5 kg
END201-2
sound power level: 103 dB (A)
Uncertainty: 3 dB(A)
The typical weighted root mean square acceleration
value is 9 m/s
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
Model; 4300BV
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
its
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
000230
ENE019-1
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
ENF002-1
8JD, ENGLAND
General Safety Rules
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
ENG006-2
(corded) power tool or battery-operated (cordless) power
tool.
SAVE THESE INSTRUCTIONS.
2
/II
Wear ear protection.
2
.
CE2008
Tomoyasu Kato
Director
4300BV
26 mm
55 mm
35 mm
6 mm
0 - 3,100
225 mm
2.5 kg
ENH101-9
GEA001-3