CORNING PC-400D Manuel d'instruction - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CORNING PC-400D. CORNING PC-400D 8 pages. Digital hot plates, stirring hot plates, stirrers, and external temperature controller
Également pour CORNING PC-400D : Manuel d'instruction (11 pages), Manuel d'instruction (14 pages), Manuel d'instruction (14 pages)
Imprimer la page
11 .0 Replacement Parts
Corning Cat . No .
Description
Model Usage
411007
Power cord
PC-400D/410D/420D, 120V
410956
Power cord
PC-600D/610D/620D, 120V
411021
Power cord
PC-400D/410D/420D and PC-600D/610D/620D, 100V
410942
Power cord
PC-400D/410D/420D and PC-600D/610D/620D,
230V (UK plug)
440124
Power cord
PC-400D/410D/420D and PC-600D/610D/620D,
230V (Euro Plug)
Contact Corning
Ceramic top plate/
PC-400D/410D/420D, All Voltages
Customer Service
element assembly,
5 x 7 in .
Contact Corning
Ceramic top plate/
PC-600D/610D/620D, All Voltages
Customer Service
element assembly,
10 x 10 in .
Contact Corning
PC control board
—
Customer Service
440135
Control knob
All models
12 .0 Technical Specifications
Power
120V/60Hz
100V/60Hz
230V/50Hz
Model No .
Type
(6795 models) (6797 models) (6796 models) (6798 models)
PC-400D
Hot
628W/
548W/
Plate
5 .3A
5 .5A
PC-600D
Hot
1043W/
1043W/
Plate
8 .7A
10 .5A
PC-410D
Stirrer
73W/
78W/
0 .7A
0 .8A
PC-610D
Stirrer
73W/
78W/
0 .7A
0 .8A
PC-420D
Stirrer/
698W/
623W/
Hot Plate
5 .9A
6 .3A
PC-620D
Stirrer/
1113W/
1113W/
Hot Plate
9 .3A
11 .2A
1
Cat . Nos . beginning with 6798 in 230V are non-European configuration models .
2
The Temperature Range using the External Temperature Controller is 5°C - 200°C (41°F - 392°F) .
12
www.
230V/50Hz
Temp .
Stir Range
1
Range
2
(rpm)
628W/
628W/
5°C-550°C
—
2 .7A
2 .7A
(41°F-1,022°F)
1043W/
1043W/
5°C-550°C
—
4 .5A
4 .5A
(41°F-1,022°F)
73W/
73W/
—
60-1,150 7 .0 lbs .
0 .3A
0 .3A
73W/
73W/
—
60-1,150 11 .5 lbs .
0 .3A
0 .3A
698W/
698W/
5°C-550°C
60-1,150 7 .0 lbs .
0 .3A
0 .3A
(41°F-1,022°F)
1113W/
1113W/
5°C-550°C
60-1,150 11 .5 lbs .
4 .8A
4 .8A
(41°F-1,022°F)
GlobalScientificSupply
.com
Weight
6 .0 lbs .
(2 .7 kg)
10 .0 lbs .
(4 .5 kg)
(3 .2 kg)
(5 .2 kg)
(3 .2 kg)
(5 .2 kg)
GLOBAL SCIENTIFIC SUPPLY
The Laboratory Supply Company!
13 .0 Size and Dimensions
Model No .
Top Plate Size
PC-400D/410D/420D
5 x 7 in .
(12 .7 x 17 .8 cm)
PC-600D/610D/620D
10 x 10 in .
(25 .4 x 25 .4 cm)
14 .0 Troubleshooting
I have a beaker of water on my hot plate and set the temperature for
w
550°C . Why does the display setting blink and not remain constant?
The display will blink at any time when the temperature sensor is not
within range of the set temperature value . The temperature measured
by the sensor is a composite of the temperature of the heating element
located beneath the sensor, the ceramic top above the sensor, and the
very small air space around the sensor . Water requires a substantial
amount of heat in order to boil yet remains at a constant temperature
of 100°C for the duration of the boiling process . Although the heating
element is producing maximum heat at the 550°C setting, the water
consumes this heat so quickly during the boiling process that the heat
is unable to raise the temperature measured by the sensor to within the
range of the 550°C set value .
How long does it take to bring a beaker of water to a boil?
w
Using a 600 mL PYREX
beaker with 400 mL of water at 25°C, it takes
®
approximately 15 minutes to bring the water to a full, rolling boil .
Can I use a metal tray on top of my Corning
w
No . The metal will act as a heat sink, and have a high probability of
creating an abnormal heating condition . If an abnormal condition is
detected, the product will shut down . A metal vessel will also scratch the
ceramic top plate .
The stir bar keeps decoupling . Why and what can I do to stop this?
w
These units are programmed to minimize decoupling . However, liquid
viscosity, stir bar magnetic strength, vessel used, and speed changes
can cause decoupling . High viscosity liquids must be stirred at slower
speed settings . The magnetic strength of stir bars can weaken over time
and may need to be replaced . The vessels used need to have thin, flat
bottoms to insure optimal performance . Rapid decreases in stir speed
can cause decoupling as the magnet slows down quicker than the stir bar
and the liquid .
What size vessel should I use?
w
The vessels used on the top of a hot plate must not be larger than the
top plate .
Product Dimensions
4 .25 x 7 .75 x 11 in .
(10 .8 x 19 .7 x 28 cm)
4 .625 x 11 x 15 .375 in .
(11 .75 x 19 .7 x 39 .05 cm)
hot plate?
®
13