ALIBI ALI-NS4022R Manuel d'installation rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} ALIBI ALI-NS4022R. ALIBI ALI-NS4022R 5 pages. Ip bullet cameras
Également pour ALIBI ALI-NS4022R : Manuel d'installation rapide (6 pages)
Imprimer la page
If an Alibi digital video recorder exists on the same LAN as the camera, the recorder may automatically
activate the camera, assigning the same admin user password setup in the recorder to the admin user
NOTE
of the camera, and configure the network settings to be compatible with the LAN and the recorder. If
this occurred automatically, skip this step and the nest step of this procedure.
To Activate the camera:
a.
Click on the camera entry in the Online Devices list to select it. The Network Parameters
and other device information will appear in the right column.
b.
Enter a "strong" password in the New Password and Confirm Password fields. Strong
passwords have: 8 to 16 characters and include at least one character from two of the
following groups: uppercase, lower case, numbers and special characters.
Click OK to set the new password. The Security status should change to Active.
c.
5.
To change the network settings of the camera to be compatible with the LAN where it is
installed, do the following:
a.
Click on the new camera to highlight it.
b.
In the right frame, click the box to Enable DHCP to acquire network settings from a
DHCP server on the network, or enter a new IP address, Subnet Mask, and Gateway that is
compatible with your LAN (see below).
Enter the password for the camera in the password field, and then click Save. If the new
c.
settings were applied, the following window will appear.
If the window above didn't appear, use the information provided to set the parameters,
and then Save the settings.
d.
Close the Discovery tool.
Step 4.
Login to the camera
To access the camera from a computer on the LAN:
1.
Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of
the camera in the URL field. In the example below, the IP address of the camera is 192.168.3.111.
3
www.observint.com
Password field
2.
In the login window, enter admin for the User Name and the password you created in the
Password field, the click Login.
3.
If this is the first time you are logging into a camera, you may see the message in the following
screen. If this appears, follow the sub-steps below.
a.
Click on the message to install the plugin.
NOTE: If QuickTime is installed on the computer, Alibi will use it for the plugin. If it
does, skip the rest of this step and continue at the next
b.
In the message bar at the bottom of the screen, click Run. WebComponents will install
automatically. When the following screen opens, click Finish to exit the installer.
The Live View screen with the camera video image should appear.
Screen select tabs
Live View image
Logout button
Capture, Record, Zoom icons
© 2017 Observint Technologies. All rights reserved.