Avantco Equipment 177PC201 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantco Equipment 177PC201. Avantco Equipment 177PC201 9 pages. Electric countertop pasta cooker/rethermalizer with water refill, drain, and overflow feature
Imprimer la page
Cleaning and Maintenance
After-use care
•
Before cleaning, turn off the appliance.
•
WARNING! Allow the pasta cooker/rethermalizer and the water to completely cool before cleaning.
•
Drain all water from the tank after every use.
•
Follow Routine Cleaning instructions below.
Routine Cleaning
•
Cleaning the appliance thoroughly on a daily basis is the key to keep it in perfect working condition and prolonging its
life.
•
Clean the appliance with a damp cloth using water and soap or detergents, provided that they are not acidic or
abrasive.
•
Such detergents should not even be used to wash the floor near the appliance, as their fumes may deposit on the
steel surfaces and damage them.
•
If the cooker/rethermalizer is very dirty, use a synthetic scrub sponge. Rinse it off with clean water and wipe it dry with
a clean cloth. Do not rub the appliance with steel wool pads as they could leave rust stains. For the same reason,
avoid touching the appliance with ferrous objects.
•
In order to prevent corrosion spots from forming, ensure that any salt residues are carefully removed from the tank's
sides and bottom.
a. We recommend using Noble Chemical's Spiffy Shine metal polish to clean and polish the outside of your
pasta cooker/rethermalizer. This gentle cleanser is safe to use and doesn't contain any harsh abrasives.
•
Never use direct water jets to clean the appliance because this could result in water entering into it and damaging it.
Periodic maintenance
•
Deliming The pasta cooker/rethermalizer MUST be delimed periodically (depending upon usage, every 3–4 weeks).
We recommend using Noble Chemicals Lime-B-Gone.
•
Fill tank to MAX. Add two caps of Lime-B-Gone. Turn on machine for 5 minutes and then drain. Please look at
manufactures instructions for more details.
•
Rinse thoroughly at least 3 times before using pasta cooker/rethermalizer after deliming.
Troubleshooting
Problem
Unit is not working
Water is not heating up and indicator
light is ON
www.AvantcoEquipment.com
User Manual
Causes
Power Supply
Thermostat Dial has not
been set
Plug/cord damage
Food debris stuck on or
between heating element
Control panel/heating
element is not correctly
positioned
Thermal protector has
been activated?
Thermostat dial has not
been set
Solution
Check power source
Set the thermostat dial to the desired temperature
Contact place of purchase for warranty coverage
Power off unit, let the unit cool, and then gently
clean on or around elements, removing the food
debris
Gently lift control panel and heating element to
make sure it is sitting in the correction position
Press reset button.
Set the thermostat dial to the desired temperature
7