HIKVISION DS-7208HTI-K2 Manuel de démarrage rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} HIKVISION DS-7208HTI-K2. HIKVISION DS-7208HTI-K2 15 pages.

Imprimer la page
3
A D D I N G C A M E R A S
 Adding IP Cameras
Before you can view live video or record video files, you must add the network cameras to the device's
connection list.
Before You Start
Ensure the network connection is valid and correct, and the IP camera to add has been activated. Refer to
the camera's user manual for steps to activating an inactive IP camera.
1. Go to Menu > Camera > IP Camera.
2. Select the IP camera from the list and
click
DVR's admin password).
3. (Optional) Check Enable H.265 (For
Initial Access) for the connected IP
camera supporting H.265. Then the IP
camera will be encoded with H.265.
 Adding Analog Cameras
•
Connect Analog Cameras
Connect analog camera(s) to the "Video In" BNC connectors.
•
Enabling Analog Cameras
Analog cameras are enabled by default; no further action is required.
4
N E T W O R K S E T T I N G S
 Configuring General Settings
Network settings must be properly configured before operating the DVR over a network.
1. Go to Menu > System Configuration >
Network > General.
2. Configure the network's general
parameters.
3. Click Apply to save the settings.
to add the camera (with the
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
Figure 1-13 Add IP Camera
Figure 1-14 Network Settings
Rev. 010918NA