Ikegami FE-B100A Manuel complémentaire
Parcourez en ligne ou téléchargez le pdf Manuel complémentaire pour {nom_de_la_catégorie} Ikegami FE-B100A. Ikegami FE-B100A 2 pages. Ikegami fe-b100a fiber extension systems: supplementary guide
Également pour Ikegami FE-B100A : Brochure (10 pages)
Imprimer la page
FE-C140SE / FE-B100A Fiber Extension System
The fiber extension system transmits HD-SDI, genlock, control, intercom, and microphone audio up to
500m (or up to 2Km with an additional separate power supply) on SMPTE hybrid fiber cable.
Large Viewfinder support
For manned operation, a large studio viewfinder such as 5" B/W CRT
VF or 9" color LCD VF can be mounted on the FE-C140SE adapter.
Fiber System Diagram
TALLY BOX (op)
MIC (op)
Prompter
RS422 or RS232C
ESC / CB
*1
PM
RET VIDEO OUT (SD-VBS)
*3
HEADSET
Prompter
RS422 or
Remote Control
RS232C
Panel
*1
HD-SDI
HD SDI
OUT-1
Digital Swer.
HD-SDI OUT-2
PM
TALLY OUT
HD-SDI OUT-3
WFM
AUDIO OUT (ANALOG)
SP
(EMBEDDED AUDIO DEMUX)
Note:
*1: RS-422/RS-232C serial data interface is provided for Prompter or Pan/Tilt system.
*2: External +12VDC power must be provided at the camera side for extending cable length more than 500m.
*3: When SD-RET is selected, there is no RET-SDI output at CA side.
*4 : Due to transmission of one RET channel over the camera cable, RET-1/RET-2 is switched at CA.
VF (op)
HEADSET
FE-C140SE
Fiber Cable Max.500m
(w/ Separate Power Max 2,000m)
*2
OCP Operation
Remote Control
FE-B100A
REF IN
Reference Sync
HD TRI SYNC or SD BBS
HD RET
SD RET-1.2 IN
*4
Source
SD RET-1.2 IN
SD RET
*4
Source
PGM IN (INTERCOM)
Program Audio
Source
INTERCOM
Intercom System
with TALLY SYSTEM
Advanced Network Control System
The OCP-200 / MCP-200 is a new Network based
control panel system offered as an alternate to the
traditional Ikegami style control panels. The Arc-
net system allows any OCP-200 to control any
camera with assignment set at the OCP itself.
System wiring is simplified with control of up to 96
cameras via a single coax cable between CCU
locations and video control locations. The OCP-200
and MCP-200 include touch screen LCDs. The
depth-of-control of the OCP-200 can be selected
from basic to complete to fit the customers'
operating discipline. Conventional one by one
camera control connection is also available.
BSH-200
Front
Rear
(HD:SDI)
CPH-200
(SD:VBS)
(ANALOG)
Front
Rear
Ikegami
OCP-200
MCP-200