Makita 5090D Manuel d'instruction - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 5090D. Makita 5090D 17 pages. 85mm with fast charger
Également pour Makita 5090D : Liste des pièces (1 pages), Ventilation des pièces (2 pages)

Makita 5090D Manuel d'instruction
0
P E RAT1
0
N
CAUTION: Read Safety Instructions on pages
6,7,
and
8
before operating saw.
Switch Action
NOTE: To prevent the trigger from
being pulled accidentally,
a lock-off lever is provided as
a safety feature.
1. Slide the lock-off lever in the
direction of the arrow
2. Pull the trigger switch.
To start the tool:
To stop the tool:
1. Release the trigger switch.
Operating the Tool
CAUTION: Before inserting the battery cartridge into the tool, always check to see
that the trigger switch actuates properly and returns to the "OFF" position
when released.
To a
1.
2.
3.
4.
,perate the tool:
Hold the tool firmly.
Set the base plate on the
workpiece to be cut without the
m
e makina anv contact.
Turn the tool on and wait until the
blade attains full SDeed.
Then move the tool forward over
the workpiece surface, keeping it
flat and advancing smoothly until
the sawing is completed.
Base
I
I
Tip:
CAUTION: If you use the tool continuously until the battery has discharged, allow
the tool to reset for
15
minutes before proceeding with a fresh battery.
To make a clean cut, keep your sawing line straight and keep your speed
0;
advance constant.
13