Avante Sit/Stand Desktop Riser Manuel d'assemblage - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'assemblage pour {nom_de_la_catégorie} Avante Sit/Stand Desktop Riser. Avante Sit/Stand Desktop Riser 3 pages.

Imprimer la page
3
Pull up the levers
on each side of
the desktop and
raise the desk,
then release the
levers.
4
5
E
Hook the keyboard tray hanging brackets to
the screws under the desktop, then tighten
the screws using the Allen key (E).
Keep monitor bases, computers etc fully on the
desktop. Allowing any part of the base or stand to
hang over the edge may result in property
damage and / or personal injury.
Raise / lower the desktop slowly. Raising / lowering
the desktop too quickly may cause objects on the
desktop to become unstable, which may result in
property damage and / or personal injury.
6
F
7
Leave sufficient slack in the cabling to allow for the full
range of vertical movement of the desktop (38cm / 15").
Failure to provide enough free cable warning may result
in property damage and / or personal injury.
WARNING
PINCH POINT
Do NOT place hands on or near support bars. Pinch points are
created when raising and lowering the desktop. Failure to
follow these instructions may result in serious personal injury.
To adjust desktop height:
1. Pull up the levers on either end
of the desktop to unlock it.
2. Move the desktop to the required
G
position.
3. Release the levers to lock the
desktop.
To avoid potentially pinching cables, it is important to
follow the cable routing instructions above. Failure to
route cables properly may result in property damage and /
or personal injury.