CAUTION:
•
The riving knife should always be used except
when plunging in the middle of the workpiece.
Rip fence (Guide rule)
The handy rip fence allows you to do extra-accurate
straight cuts. Simply slide the rip fence up snugly
against the side of the workpiece and secure it in
position with the screw on the front of the base. It also
makes repeated cuts of uniform width possible.
MAINTENANCE
CAUTION:
•
Always be sure that the tool is switched off and unplugged
before attempting to perform inspection or maintenance.
Clean out the guard to ensure there is no accumu-
•
lated sawdust and chips which may impede the
operation of the guarding system. A dirty guarding
system may limit the proper operation which could
result in serious personal injury. The most effective
way to accomplish this cleaning is with compressed air.
If the dust is being blown out of the guard, be sure
the proper eye and breathing protection is used.
•
Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
Replacing carbon brushes
► 1 . Limit mark
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
► 1 . Screwdriver 2. Brush holder cap
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
•
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
•
•
•
NOTE:
•
1
10 ENGLISH
CAUTION:
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
Saw blades
Rip fence (Guide rule)
Hex wrench
Joint
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.
2
1
Imprimer la page