Makita 6906 Manuel d'instruction - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 6906. Makita 6906 13 pages. Makita 6906 impact wrench: specifications
Également pour Makita 6906 : Ventilation des pièces (3 pages), Manuel d'instruction (8 pages), Manuel d'instruction (20 pages), Manuel d'instruction (7 pages), Manuel d'instruction (8 pages)
Imprimer la page
1
2
1. Socket
2. Anvil
OPERATION
6
Installing or removing socket
002338
To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.
The proper fastening torque may differ depending upon the
kind or size of the bolt, the material of the workpiece to be
fastened, etc. The relation between fastening torque and fas-
tening time is shown in the figure.
N.m
(ft.lbs)
700
(505)
600
(433)
500
(361)
400
(288)
300
(216)
200
(144)
100
(72)
0
1
2
Hold the tool firmly and place the socket over the bolt or nut.
Turn the tool on and fasten for the proper fastening time.
NOTE:
•
Hold the tool pointed straight at the bolt or nut.
•
Excessive fastening torque may damage the bolt/nut or
socket. Before starting your job, always perform a test
operation to determine the proper fastening time for your
bolt or nut.
3
4
5
Fastening time
Rated voltage
90% of rated voltage
7
8
6
(S)