Avantgarde DUO GT Manuel de l'utilisateur - Page 14
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantgarde DUO GT. Avantgarde DUO GT 19 pages.
Imprimer la page
OPERATION – SUBWOOFER DSP AMP
DSP VOLUME SETTINGS
SPEAKER TYPE
UNO SD
MODEL NO.
BASSAMP-G3-500
VOL
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
CLIP
1 1
SIG
VOL
DSP PROGRAMMING
SERVICE USE ONLY
1 2
GROUND
OUT
IN
B
C
1 4
A
D
RESET
12V DC
ENGAGED
MODE
TOGGLE
FUSE
POWER
TRIGGER
E FUSE
DIMMER
The bass response of the speaker will be influenced by the room and
the position of the speaker. This might cause the bass response of
the speaker to be strengthened or weakened. Thus as the first step,
the overall bass volume needs to be aligned to compensate these
effects.
FUSE
1
Press the VOL �–button
�
to increase or the VOL �–button
reduce the volume of the bass response. The set volume is indicated
in the display
�
.
WARNING
ELECTRICAL SHOCK HAZARD
DUO SD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
FUSE 4.0 A SLOW
DSP
SERVICE USE ONLY
1 3
SPEAKER LEVEL INPUT
PUSH
SPKR
MUTE
XLR
INPUT
OUTPUT
BALANCED SIGNAL
INPUT SELECT
�
to
26
OPERATION – SUBWOOFER DSP AMP
DSP SOFTWARE INSTALLATION
Additional settings can be programmed with the Avantgarde
Control software.
The software can be requested by email at our service desk:
LAN CONNECTION TO PC
Each SPACEHORN amplifier features 2 x LAN sockets which allow to
1
daisy chain multiple subwoofers.
Connect the LAN ports
2
LAN–cable (type CAT5/6/7/8).
3
Connect a free LAN port
your computer or with the LAN port of your WIFI router. The
Avantgarde Control software installed on your computer/laptop will
automatically detect and display all available subwoofer amps.
USB CONNECTION TO PC
USB port
�
for service use only.
IMPORTANT!
The LAN and the USB connectors are not suitable for the connection
of music sources!
27
�
of all SPACEHORNS with each other using
�
of one SPACEHORN with the LAN port of