Makita 9207SPB Manuel d'instruction - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita 9207SPB. Makita 9207SPB 8 pages. Polisher
Également pour Makita 9207SPB : Manuel d'instruction (17 pages), Manuel d'instruction (12 pages), Manuel d'instruction (8 pages)
Imprimer la page
Fit the wool bonnet completely over the rubber pad and
pull the string tight. Tie a bow knot and tuck the knot
and any loose strings between the wool bonnet and the
rubber pad.
003462
To remove the wool bonnet, follow the installation
procedure in reverse.
OPERATION
Polishing operation
003475
CAUTION:
Always wear safety glasses or a face shield during
•
operation.
Hold the tool firmly. Turn the tool on and then apply the
wool bonnet to the workpiece.
In general, keep the wool bonnet at an angle of about
15 degrees to the workpiece surface.
Apply slight pressure only. Excessive pressure will
result in poor performance and premature wear to wool
bonnet.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
15
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly. Replace when
they wear down to the limit mark. Keep the carbon brushes clean
and free to slip in the holders. Both carbon brushes should be
replaced at the same time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
003481
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended
•
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments
might present a risk of injury to persons. Only use
accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Wool bonnet 180
•
Wrench 17
•
Rubber pad 170
•
Lock nut 48
•
Lock nut wrench 28
•
Side grip (auxiliary handle)
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
7
1. Limit mark
1
1. Screwdriver
2. Brush holder
1
cap
2