James ULTRA 7000S Manuel de l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} James ULTRA 7000S. James ULTRA 7000S 12 pages. Digital ultrasonic cleaner
Imprimer la page
- 1. Table of Contents
- 2. Safety Instructions
- 3. Dirt Elimination Processes
- 4. Suggested Applications
- 5. What Cannot be Cleaned
- 6. Features and Accessories
- 7. Default Time Intervals
- 8. Operation Instructions
- 9. Cleaning Methods
- 10. Usage for Accessories
- 11. Maintenance and Storage
- 12. Limited Warranty
OPERATION INSTRUCTIONS
Open the cover, and place the object to be cleaned into the
stainless steel tank.
Then, using a jug, fill the stainless steel tank with normal tap water.
The liquid must cover the object that is to be cleaned, but must
not exceed the mark indicating the maximum filling height.
Never use the ultrasonic cleaning device without
water as you will damage the device!
Close the cover and insert the mains plug.
3
The figure 180 (180 seconds) appears in the display as standard
- this is the standard time for a normal degree of soiling.
Select the desired time from five possible intervals:
180s
Use the SET button to set the desired time according to the
degree of soiling.
Press ON switch and start the cleaning process.
The blue indicator lamp in the housing lights up while the time
shown in the display counts down to 0.
Note: During cleaning process a quiet vibration noise can
be heard; this is caused by the cleaning process.
After the set time has elapsed the cleaning process is automatically
stopped, the blue indicator lamp goes off and the display
shows 000.
300s
480s
6
90s
600s