Makita AN450H Informations techniques - Page 15
Parcourez en ligne ou téléchargez le pdf Informations techniques pour {nom_de_la_catégorie} Makita AN450H. Makita AN450H 16 pages. Pneumatic roofing coil nailer
Imprimer la page
R
epair
[4] DISASSEMBLY/ASSEMBLY
[4]-10 Feeding mechanism
DISASSEMBLING
(1) Separate Magazine section from machine, as illustrated in Fig. 10.
(2) Remove Contact arm and Contact top as illustrated in Fig. 15.
(3) Separate Driver guide complete from Housing set as per the left illustration in Fig. 16.
(4) Remove Door, Piston and Feeding claw from Driver guide complete in the order of Figs. 29 to 31.
Fig. 29
Pin 4
Push Pin 4 toward the nail firing
direction with slotted screwdriver
in order to protrude the other end
of Pin 4.
Fig. 30
Remove Retaining ring R-24 while pressing
Cup washer 5 with your finger so as not to be
slung by Compression spring 7.
Fig. 31
Remove Urethane ring 3, and pull off Pin 4-4.5.
Piston and Feeding claw can be removed from Driver guide complete.
Urethane ring 3
Urethane ring 3
Pin 4
Clamping the protruded end of Pin 4
with pliers, pull it off toward the nail
firing direction.
Feeding claw
Cup washer 5
Retaining ring R-24
Cup washer 5, Rubber ring 16, Compression spring 7
can be removed from Driver guide complete.
Pin 4-4.5
Magazine cap
complete
Door
Disassemble Door and Magazine
cap complete from Driver guide
complete.
Piston
Compression spring 7
Rubber ring 16
Feeding claw
Piston
O ring 9
O ring 14
P 15/ 16
Driver guide
complete