Makita AN611 Manuel d'instruction - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita AN611. Makita AN611 19 pages. Construction coil nailer
Également pour Makita AN611 : Ventilation des pièces (4 pages), Ventilation des pièces (4 pages), Manuel d'instruction (13 pages), Manuel d'instruction (12 pages)

Never use the tool with other than compressed air.

If bottled gas (carbon dioxide, oxgen, nitrogen,

hydrogen, air, etc.) or combustible gas (hydrogen,

propane, acetylene, etc.) is used as a power source

for this tool, the tool will explode and cause serious

injury.

*Always check the tool for its overall condition and

loose screws before operation. Tighten as required.

Make sure all safety systems are in working order

before operation. The tool must not operate if only

the trigger is pulled or if only the contact element

is pressed against the wood. It must work only when

both actions are performed. Test for possible faulty

operation with nails unloaded.

COMPRESSED

AIR