Bernzomatic Mag-Torch MT545 Manuel d'instruction

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Bernzomatic Mag-Torch MT545. Bernzomatic Mag-Torch MT545 6 pages.

Imprimer la page
Instruction Manual
MODELS: TS3700, MT545
1
3
1
1
1
2
•
Never attempt to modify the torch construction and never use unapproved accessories or fuels.
•
Treat the torch as you would any fine tool or instrument. Do not drop, throw, or otherwise abuse.
•
Do not use a leaking, damaged or malfunctioning torch.
•
Always wear safety glasses, protective gloves and use proper tools to handle hot work.
•
Radiant energy can harm your eyes. Wear glasses having an appropriate lens shade number (see 29 CFR 1926.102) for the torch
operation being done; brazing and light cutting (3 or 4), medium cutting and light welding (4 or 5), heavy cutting and medium/
heavy welding (5-8).
•
Work only in well-ventilated areas. Avoid the fumes from fluxes, lead-based paint, and all metal heating operations. Be careful
to avoid fumes from cadmium plating and galvanized metal- remove these coatings in the area to be heated by filing or sanding
prior to heating.
•
Never use torch to strip lead paint.
•
Be careful when using the torch outdoors on sunny or windy days. Bright light makes it difficult to see the torch's flame. Wind
may carry the torch's heat back towards you or other areas not intended to be heated. Windy conditions may also cause sparks
to be blown into other areas with combustible materials.
•
Heating a surface may cause heat to be conducted to adjoining surfaces that may be combustible or become pressurized when
heated. Always check to make sure no unintended parts or materials are being heated.
•
Be aware that the tip of the torch can get extremely hot during use. Take precautions to protect yourself and others from
accidental burns.
•
Never use the torch on or near combustibles. Be careful around motor vehicles or any gasoline-fired products and beware of
hidden fuel lines and tanks.
•
Always make certain the torch is placed on a level surface when connected to the fuel cylinder to reduce the risk of accidental
tip over. Be sure the torch is not pointed in a direction which could cause nearby objects to ignite when the torch is set down.
•
Be careful not to overheat surrounding materials. Use a heat shield when necessary.
•
Never leave the torch unattended when lit.
•
Never attempt to repair or heat a gasoline tank, a chemical drum, an aerosol can, a compressed gas container that held
flammable liquid or gas or any other chemical. Heating these is extremely dangerous, especially after they have been emptied
because vapors may still be in the container.
•
Always have a fire extinguisher and a bucket of water near the torch and work area.
•
This torch consumes oxygen and must only be used in well ventilated areas. Do not use in a confined space.
ASSEMBLY
1.
Before attaching cylinder, make sure valve is closed by turning adjustment knob (1) clockwise until it stops. Hand tighten only. Do
DO NOT DISCARD THESE WARNINGS AND INSTRUCTIONS | NE PAS JETER CES AVERTISSEMENTS ET CES INSTRUCTIONS
This torch is used with a flammable product. Failure to comply with
1
3
these Warnings and Instructions may result in an explosion or fire that
may cause property damage, serious personal injury or death.
Read and comply with the instructions and warnings in this
manual and familiarize yourself with the torch before lighting and
1
using. Review instructions and warnings periodically to maintain
1
1
2
awareness. Do not try to operate before reading instructions.
Torches are to be used only with hand held gas cylinders
specifically designated for use with torches.
lead, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.
P65Warnings.ca.gov. Wash hands after handling.
•
Keep torch out of reach of children and anyone who has not read instruc-
tions. Do not point torch towards face, other persons or flammable objects.
Never attempt to use torch as a cigarette lighter.
•
Disconnect cylinder when not in use.
NO DESECHE ESTAS ADVERTENCIAS E INSTRUCCIONES
DANGER
WARNING:
This product can expose you to chemicals including
ENG
DANGER
FIRE
EXPLOSION
FRA
DANGER
INCENDIE
EXPLOSION
ESP
PELIGRO
FUEGO
EXPLOSIÓN
ENGLISH | ANGLAIS | INGLÉS
ASSEMBLY
FUMES
VAPEURS
VAPORES