e-survey E100 Manuel de l'utilisateur - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} e-survey E100. e-survey E100 15 pages. Gnss receiver
3. Basic Operation
This part shows user some basic operations to start working with E100.
3.1 Insert SIM card
E100 supports network working mode. Open the cover and insert SIM card.
3.2 Charge the battery
E100 is equipped with Type-C charger which support maximum 45w PD quick charge.
Fully charge the battery will take 4 hours typically. The battery indicator is red when
charging, will turn green when fully charged.
3.3 Measure antenna height
In order to get correct elevation value, we need to know the correct phase center
height of the receiver. However, it is almost not possible to measure the phase center
directly. Normally, the software will read the receiver antenna offset parameters.
Once user input the measurement height, software will calculate the phase center
height automatically. Typically, there are two ways to measure the height:
A: Slant height (to measurement line)
•
Centering and leveling the tripod on known point, then measure slant height from
the ground point to the arrow at the side of the receiver.
B: Pole height (straight height to device bottom)
•
Read the straight pole height
A: Slant height
Measurement Line
E100 User Manual
B: Pole height