e-survey E800 Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} e-survey E800. e-survey E800 17 pages.

3.5 Tilt Survey

E800 is equipped with MEMS sensor which supports tilt survey in SurPad4.0 software.

The calibration is very simple.

To calibrate the MEMS sensor, receiver must be in Fixed solution. In SurPad4.0

software, connect device and click "Device" -> "Device Settings", open "Pole Tilt

Correction" function. Then, go to "Survey" -> "Point Survey" page. The software will

guide user to calibrate the sensor.



Input the correct pole height



Draw circle on the ground using the pole



Shake the pole back and forth for around 5-10 seconds



Rotate the pole 90° and repeat the lase step until it shows "Ready"