ALIBI ALI-CD1080E Manuel d'installation rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} ALIBI ALI-CD1080E. ALIBI ALI-CD1080E 4 pages.

Imprimer la page
Examples
The following examples provided demonstrate how to use the menus to perform basic configuration tasks.
For clarity, the background video image was removed in the screens included here.
Example 1: Change video frame rate
The video frame rate parameter can be set using the Main Menu VIDEO OUT submenu. To change the
setting:
1.
Open the OSD Main Menu (see "Step 3. Open the OSD menu" on page 2).
With the > marker at the VIDEO OUT entry, click the Iris + button to open the VIDEO OUT submenu
2.
(see the right screen above.
With the > marker at the FRAME RATE entry, click the t or u button to decrease or increase the
3.
frame rate.
Click the q button to position the > marker at RETURN, and then click the Iris + button to return
4.
to the previous menu (MAIN MENU).
Click the p button to position the > marker at EXIT, and then click the Iris + button to open the
5.
EXIT submenu.
Click the q or p button to position the > marker at either SAVE/EXIT or EXIT, and then click the
6.
Iris + button.
SAVE/EXIT: Use this option if you want to retain the setting. It can be changed at any time.
EXIT: Use this option if you want to retain the setting temporarily. If the camera is powered off, the
NOTE
new setting is lost.
Example 2: Change the camera video settings
Video settings for the camera are configured in the EFFECT submenu. You an also flip (vertical reflection)
and/or mirror (horizontal reflection) the image in this menu. To change the setting:
1.
Open the OSD Main Menu (see "Step 3. Open the OSD menu" on page 2).
Click the q button to position the > marker at EFFECT, and then click the Iris + button to open the
2.
EFFECT submenu.
Click the q or p button to position the > marker at the parameter you want to change, and then
3.
click the t or u button to decrease or increase the setting. The FLIP and RETURN options are
either ON or OFF. The effect of changing the parameter is shown immediately in the video image.
4.
Repeat the previous step to change other parameter values if necessary.
www.observint.com
4
Click the q button to position the > marker at RETURN, and then click the Iris + button to return
5.
to the previous menu (MAIN MENU).
Click the q button to position the > marker at EXIT, and then click the Iris + button to open the
6.
EXIT submenu.
Click the q or p button to position the > marker at either SAVE/EXIT or EXIT, and then click the
7.
Iris + button.
Cleaning
Clean the camera dome with an approved glass cleaning solution and a lint free cloth.
Dust can be removed from the unit by wiping it with a soft damp cloth. To remove stains, gently rub
•
the surface with a soft cloth moistened with a mild detergent solution, then rinse and dry it with a
soft cloth.
Remove all foreign particles, such as plastic or rubber materials, attached to the camera housing.
•
These may cause damage to the surface over time.
Do not use benzene, thinner or other chemical products on the camera assembly; these may
promote damage of the surfaces. Before using any chemical product, carefully follow the
CAUTION
accompanying instructions.
Specifications
Parameter
Specification
Image Sensor
1 / 2.7" Progressive Scan CMOS
Signal System
NTSC
Effective Pixels
1930(H) * 1088(V)
Min. Illumination
0.1 lux @ (F1.2, AGC ON), 0 lux with IR
Shutter speed
1/30 s to 1/50,000 s
Lens
2.8 mm lens, angle of View: 90°
Lens Mount
φ14
Angle Adjustment
Pan: 0 - 350°, tilt: 0 - 70°
Day & Night
ICR
Synchronization
Internal synchronization
Video Frame Rate
1080p @ 30 fps
HD Video Output
1 Analog HD output
S / N Ratio
More than 52 dB
Menu
Camera ID
On/off (0 ~ 255)
AGC
Support
D/N Mode
Color / BW/ Auto / EXT
White Balance
Auto / User / Push / 8000 K / 6000 K / 4200 K / 3000 K
Privacy Mask
On/Off, maximum 2 zones
Motion Detection
On/Off, maximum 4 zones
BLC
Support
Anti-flicker
On / Off
Language
English / Chinese
Function
Digital noise reduction, Mirror
General
Working Temperature / Humidity
14 °F ~ 122 °F (-10 °C ~ 50 °C)
Humidity
90% or less (non-condensing)
Power Supply
12 Vdc
Power Consumption
Max. 3 W
IR Range
Up to 65 ft (20 m), wavelength 840 nm
Communication
Up the coax (OSD control through the HD-TVI DVR)
Protocol:
Coaxitron
Dimensions
φ 3.5 in x 3.0 in (φ 89 mm x 76.2 mm)
Weight
0.52 lb (235 g)
© 2015 Observint Technologies. All rights reserved.