ALIBI ALI-CD5021VSS Manuel d'installation rapide et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide et d'utilisation pour {nom_de_la_catégorie} ALIBI ALI-CD5021VSS. ALIBI ALI-CD5021VSS 4 pages. Hd-tvi extreme outdoor ir dome camera

Imprimer la page

OSD

joystick

The OSD joystick is used to open the OSD menu, to navigate through the menus, and to select

parameters to customize camera for the installation.

To open the OSD, the camera submenus, and select a menu option, press the joystick "in" (toward

the mounting base). To navigate the menus, rock the joystick up (UP (p), see photo above) or

down (q) to move through the parameter list menus vertically, rock the joystick left (t) or

right (u) to change the parameter value that appears for the parameter. Press the joystick "in" (in

toward the base assembly to "select") to select the parameter shown or open the submenu.

Typical camera live image with OSD overlaid

Open the OSD menus by pressing the joystick toward the mounting base. The OSD menu table is

shown below. Examples included after the menu table demonstrate how to perform common tasks.

OSD Menu structure

Main Menu

Submenu

options

BRIGHTNESS

LENS-DC

AE MODE

EXPOSURE

SHUTTER

SENS-UP

AGC

AWB: select WHITE BALANCE mode includes the following:

AUTO

WHITE BALance

AUTO ext

MANUAL

BACKLIGHT

WDR

HLC

BLC includes the following:

BACK LIGHT

AREA

POS-X

POS-Y

SIZ-X

SIZ-Y

www.observint.com

Summary

Adjust brightness level 0 (dark) ~ 20 (bright)

Select when use of DC Auto-Iris lens/except the special cases, DC is standard

Model

Select AE MODE (automatic exposure mode)

Can be set in AUTO or MANUAL

Select maximum DSS (Digital Slow Shutter) OFF, x2~x8

Select Auto Gain Control

Automatically adjusts color according to the lighting

Faster extension version of Auto

Adjust the white balance manually

Select Backlight compensation mode

Adjust WDR level - Low / Middle / High

Select High Light Compensation.

Control BLC area according to light condition.

Adjust the window X- axis position

Adjust the window Y- axis position

Adjust the window X- axis size

Adjust the window Y- axis size

Main Menu

Submenu

Summary

options

DAY&NIGHT

Select Day & Night mode

AUTO-CDS: Automatic switching between day operation (color mode) and night operation (black and

white mode). Includes the following

IR-LED

LED On/Off Control

DAY & NIGHT

ANTI-SAT

Compensate when IR hunting happens. When you use this function.

Day & Night change level. Higher level make the night mode changed in lower

AGC THRS

illumination.

AGC MARGIN

Day to night and night to day switch margin

DELAY

2 ~ 60 second

DNR

Select Digital Noise Reduction

SHARPNESS

Adjust sharpness level

COLOR GAIN

Adjust Color gain value 0~20 Steps.

GAMMA

Select gamma mode. 0.45 ~ 0.65

D-WDR

Select Digital WDR (Wide Dynamic Range)

IMAGE

DEFOG

Carry out defog function.

SHADING

Select Lens shading compensation. (OFF / ON)

MIRROR: Includes the following

H-Fli

Flip the picture horizontally on the screen

V-Flip

Flip the picture vertically on the screen

Rotate

Flip the picture horizontally & vertically on the screen

TITLE

Camera title edit and display on / off select

PRIVACY

Hide an area you want to hide on the screen

When there is movement of the subject on the screen, there will be motion

MOTION

detection

SPECIAL

D-ZOOM

Select digital zoom magnification. Max 8x

LANGUAGE

Select Language

COMM.

Setup Camera ID and baud-rate. (Pelco-D/P Auto detect) (OPTION)

IMAGE RANGE

Select pedestal level scale

HD Format

Select HD output format. 1080p

SYSTEM

HD FPS

Select HD output frame rate. 1080p 30, 25

CVBS

Select CVBS output mode. NTSC or PAL

RESET

Camera OSD settings will be restored to the factory default configuration

EXIT

Close the menu

Using the OSD - example: Adjust the image quality

Use the example included here as a model for configuring other OSD options. NOTE: For clarity, screen

captures used here show only the OSD menus. A live video image normally appears the background.

The default camera settings produce optimal image quality for most applications. However, some

environments may have conditions the camera can be adjusted to compensate for. Also, it can be

configured to reflect or mirror the image to provide a more realistic view. Use the following steps to make

whatever adjustments are needed to improve the video image. Perform the following during "normal"

lighting conditions in the field of view.

Remove the camera dome cover assembly to access the OSD joystick.

Press the joystick in toward the mounting base to open the OSD menu. The main menu option

highlighted in yellow indicates the current selection.