Makita BJV180 Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita BJV180. Makita BJV180 18 pages. Cordless jig saw
Également pour Makita BJV180 : Ventilation des pièces (3 pages), Fiche technique (2 pages), Manuel d'instruction (13 pages), Manuel d'instruction (13 pages), Manuel d'instruction (13 pages), Informations techniques (13 pages)

Imprimer la page

Replacing carbon brushes (Fig. 30 & 31)

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take

out the worn carbon brushes, insert the new ones and

secure the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Jig saw blades

• Hex wrench 4

• Rip fence (guide rule) set

• Guide rail adapter set

• Guide rail set

• Anti-splintering device

• Cover plate

• Dust nozzle

• Makita genuine battery and charger

NOTE:

• Some items in the list may be included in the tool pack-

age as standard accessories. They may differ from

country to country.

Noise

The typical A-weighted noise level determined according

to EN60745:

Model BJV140

Sound pressure level (L

Sound power level (L

Uncertainty (K): 3 dB (A)

Model BJV180

Sound pressure level (L

Sound power level (L

Uncertainty (K): 3 dB (A)

Wear ear protection

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: cutting boards

Vibration emission (

Uncertainty (K): 1.5 m/s

Work mode: cutting sheet metal

Vibration emission (

Uncertainty (K): 1.5 m/s

ENG905-1

): 83 dB (A)

): 94 dB (A)

): 84 dB (A)

): 95 dB (A)

ENG900-1

): 7.0 m/s

h, B

): 3.5 m/s

h, M

• The declared vibration emission value has been mea-

sured in accordance with the standard test method and

may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the oper-

ator that are based on an estimation of exposure in the

actual conditions of use (taking account of all parts of

the operating cycle such as the times when the tool is

switched off and when it is running idle in addition to

the trigger time).

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-

turer declare that the following Makita machine(s):

Designation of Machine:

Cordless Jig Saw

Model No./Type: BJV140, BJV180

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

30.1.2009

Tomoyasu Kato

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

Director

ENG901-1

ENH101-16