Gardco PUREFORM GEN. 2 P34 WS Manuel d'instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Gardco PUREFORM GEN. 2 P34 WS. Gardco PUREFORM GEN. 2 P34 WS 6 pages. Area luminaires -wall/surface

Imprimer la page

INSTALLATION INSTRUCTIONS

PUREFORM GEN. 2 – P26/P34 WALL/SURFACE MOUNT (WS)

REQUIRED TOOLS: 9/16" SOCKET/OPEN‐END WRENCH & #2 PHILLIPS‐HEAD SCREWDRIVER

STEP 1: SECURE WALL BOX TO MOUNTING SURFACE

Wall mounting bracket is secured to wall with 3/8" studs or bolts

(Supplied by others).

The installer shall assure that structural members are present in

the wall with a sufficient safety factor to anchor mounting hard-

ware and support a luminaire weight up to 30 pounds for the

P26 and 37 pounds for a P34.

Refer to page 3 (Figure 1) for mounting hole pattern.

STEP 2: INSTALL SQUARE POLE ADAPTER (SPA)

Remove adhesive film from SPA and secure the adapter over

the mounting holes on Wall Box. Using the 3/8"‐16 x 2" hard-

ware provided,

install (1x) bolt, split washer and washer into the top threaded

hole of the wall box. DO NOT TIGHTEN ALL THE WAY. Leave

approx. a 1" gap to hang luminaire.

STEP 3: INSTALL LUMINAIRE

Loosen (2x) #8‐32 retained screws that secure the door

to the luminaire. Lower door and hang luminaire over

top mounting bolt using the key slot feature on the

back of the arm. Ensure that the washers remain on

the inside of the luminaire. Install the remaining 3/8"‐

16 x 2" bolt, split washer and flat washer into the lower

mounting slot of the luminaire.

Torque mounting hardware to 20ft-lbs.

STEP 4: MAKE WIRE CONNECTIONS

Once luminaire is installed and hardware is properly

torqued, make supply wiring connections according

to the appropriate wiring diagram.

* 0‐10V AND OVERRIDE WIRES OPTIONAL

* WIRE NUTS SUPPLIED BY OTHERS

* CONDUIT SUPPLIED BY OTHERS

which information may be subject to change. No representation or warranty as to the accuracy or completeness of the

information included herein is given and any liability for any action in reliance thereon is disclaimed. The information

presented in this document is not intended as any commercial offer and does not form part of any quotation or contract.

All trademarks are owned by Signify Holding or their respective owners.

Page 2 of 3

P/N 443560819360 Rev B

Signify North America Corporation

200 Franklin Square Drive

Somerset N.J. 08873, USA

Signify Canada Ltd./Signify Canada Ltée.

281 Hillmount Road,

Markham, ON, Canada L6C 2S3