ALIBI ALI-NVR3108 Manuel d'installation rapide - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} ALIBI ALI-NVR3108. ALIBI ALI-NVR3108 12 pages.

SATA cable

connector

Power cable

connector

Screw the four HDD mounting screws into the mounting screw holes until the screw heads are about 1/8 inch from the surface bottom

of the HDD.

Follow recommended electrostatic discharge (ESD) guidelines while performing this procedure. Install the HDD in a static-free

environment, wearing a certified ESD wrist strap. If a static free environment and ESD wrist strap is not available, touch the bare metal of



the DVR chassis frequently when installing the drive to dissipate the static charge naturally generated on your skin and clothing and avoid

CAUTION

touching electronic components.

Position the HDD in HDD 2 bay such that the HDD cable connectors are toward the middle of the chassis and the HDD mounting screws

are fully seated in the mounting screw slots.

While holding the HDD in place, carefully turn over the chassis with the HDD and then tighten the mounting screws to secure the HDD.

Be careful not to overtighten the screws.

HDD 2 mounting screws

www.Observint.com

HDD mounting

screw holes

Turn the chassis over so the top is up.

Attach the HDD SATA cable to the HDD 2 SATA cable connector on the PC board, and then to the SATA connector on the HDD. When the

connector is fully seated, it snaps into place.

10.

Attach the HDD power cable to the power cable connector on the HDD.

11.

Reinstall the chassis cover.

12.

Initialize the HDD. Refer to the ALIBI Embedded Network Video Recorder Firmware V3.3.4 User Manual available for download

from your vendor.