Makita BTW103 Manuel d'instruction - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita BTW103. Makita BTW103 12 pages.
Imprimer la page
013587
Use pliers to remove the carbon brush cap of the
carbon brushes. Take out the worn carbon brushes,
insert the new ones and replace the carbon brush cap in
reverse.
013588
Make sure to place the lead wire in opposite side of the
arm.
1
2
013577
Put the lead wires between the spacer and the side of
brush holder.
1
2
006304
Make sure that the carbon brush caps fit into the holes
in brush holders securely.
Reinstall the rear cover and tighten two screws securely.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
1. Carbon brush
cap
1
1. Lead wire
2. Spacer
1. Hole
2. Carbon brush
cap
OPTIONAL ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Protector (white, blue, red)
•
Battery Protector for BL1430A
•
Battery Protector for BL1415NA
•
Battery BL1430A
•
Battery BL1415NA
•
Makita genuine charger
•
Automatic refreshing adapter for BL1430A only
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
9
or
attachments
Only use
accessory or
are