Avanti SBCA017G Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Avanti SBCA017G. Avanti SBCA017G 16 pages. Superconductor refrigerator
Également pour Avanti SBCA017G : Liste des pièces (2 pages), Manuel d'instruction (16 pages), Manuel (4 pages)
Imprimer la page
CAUTION
Failure to unplug the Beverage Cooler could result in electrical shock or personal injury.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
Beverage Cooler if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your food.
Vacation Time
Short vacations: Leave the Beverage Cooler operating during vacations of less than three
weeks.
Long vacations: If the appliance will not be used for several months, remove all food and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the door open slightly: blocking it open if necessary.
Moving Your Beverage Cooler
Securely tape down all loose items inside your Beverage Cooler.
Tape the door shut.
Protect the outside of Beverage Cooler with a blanket, or similar item.
Energy Saving Tips
The Beverage Cooler should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
Overloading the Beverage Cooler forces the superconductor cooling system to run longer.
Reduce door openings and extended searches, remove as many item as needed at one time,
and close the door as soon as possible.
One characteristic of superconductor heat-pipe units is the length of time it requires to
recover from having the door opened and shut frequently. It may be necessary to wait longer
for the temperature to return to its former level once the door has been opened for too long.
This is normal for the type of unit.
PROBLEMS WITH YOUR BEVERAGE COOLER?
You can solve many common Beverage Cooler problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Beverage Cooler does not operate.
Beverage Cooler is not cold enough.
The light does not work.
Vibrations.
The door will not close properly.
POSSIBLE CAUSE
Not plugged in.
The circuit breaker tripped or a blown fuse.
The appliance temperature control is set at "OFF" position.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The Beverage Cooler does not have the correct clearances.
Abnormal voltage.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The LED light has burned out.
Check to assure that the Beverage Cooler is level.
The Beverage Cooler is not level.
The door was reversed and not properly installed.
The gasket is dirty.
The shelves, bins, or baskets are out of position.
10