Avanti WCR8500SDZ Manuel d'instruction - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Avanti WCR8500SDZ. Avanti WCR8500SDZ 20 pages. Dual zone wine chiller

Imprimer la page

STORAGE

Many bottles may differ in size and dimensions. As such the actual number of bottles you may be able

to store may vary.

NOTE:

Capacity:

Bottle capacities are approximate maximums when storing traditional Bordeaux 750 ML bottles

and include bulk storage.

 INTERIOR LIGHT

•

You can turn the interior light on or off by pushing the button marked

 CONTROL PANEL LOCK

•

Your Wine chiller is equipped with an automatic Control panel lock function. This function will

prevent any unwanted changes to your temperature or power settings.

•

The lock function will activate automatically 12 seconds after the last time a button is pushed on

the control panel.

•

To unlock the control panel lock press and hold the (UP)

simultaneously for 3 seconds the control panel will beep once indicating that the control panel is

active and the settings can be changed.

 DOOR LOCK

Your unit is provided with a lock and key combination.

The keys are located inside the plastic bag that contains the User's Guide. Insert the key into the lock

and turn it counterclockwise to lock the door. To lock the door do the reverse operation making sure

metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping.

 SHELVES

The appliance is equipped with the wired shelves. You can

move the shelves out and in smoothly.

•

To prevent damaging the door gasket, make sure to

have the door all the way opened when pulling the

bottom shelf out of the rail compartment.

•

For easy access to the storage content, you can pull

the shelf approximately 100% out of the rail

compartment, however this unit was designed with a

stopper on each side of the shelf track to prevent

bottles from falling.

•

When removing the shelf out of the inner rail, make

sure to remove all items first. Then pull the shelf until

it is stopped by the stopper, and then lift the shelf. In

order to replace the shelf, repeat steps described

above in reverse.

and the (DOWN)

buttons