Makita DCG180 Manuel d'instruction - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita DCG180. Makita DCG180 12 pages. Vezeték nélküli szigetelępisztoly
Également pour Makita DCG180 : Manuel d'instruction (12 pages), Manuel d'instruction (12 pages), (hongrois) Manuel de l'utilisateur Manuel (10 pages)
Imprimer la page
ENGLISH (Original instructions)
SPECIFICATIONS
Stroke
Overall length
Standard battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and electronic
equipment, 2006/66/EC on batteries and
accumulators and waste batteries and
accumulators and their implementation in
accordance with national laws, electric
equipment and battery pack that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Intended use
This tool is intended for applying caulking material to
surface.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
Model
Max feed force
Feed speed
with short (300ml) holder
with long (600ml) holder
with short (300ml) holder
with long (600ml) holder
with short (300ml) holder
with long (600ml) holder
Rated voltage
noise
level
determined
) : 70 dB (A) or less
pA
DCG140
BL1415 /
BL1415N
2.0 kg
2.4 kg
D.C.14.4 V
END004-4
Vibration
The
vibration
determined according to EN60745:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENE086-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENG905-1
is running idle in addition to the trigger time).
2
DCG180
5000 N
0 - 28 mm/s
214 mm
350 mm
404 mm
538 mm
BL1430 /
BL1815 /
BL1440
BL1815N/BL1820
2.2 kg
2.1 kg
2.6 kg
2.5 kg
D.C.18 V
total
value
(tri-axial
2
) : 2.5 m/s
h
2
BL1830 /
BL1840/BL1850
2.3 kg
2.7 kg
ENG900-1
vector
sum)
or less
ENG901-1