Lexmark 2050 Color Jetprinter Manuel de configuration - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Lexmark 2050 Color Jetprinter. Lexmark 2050 Color Jetprinter 2 pages. Setup guide

Imprimer la page

Loading other print media

To load Hagaki, envelopes, greeting cards, or

index cards in the sheet feeder, follow these

steps:

Use the printer software

Open the paper load door and remove any

paper in the sheet feeder.

You can use the Lexmark 2050 Series printer

Turn both left and right envelope guides

software to:

inward to the envelope load position.

•

change printer settings

Press on the envelope symbol area to

•

install and align print cartridges

rotate the guides inward until they snap

•

monitor print jobs and print cartridge ink

into position.

levels

•

control jobs in the print queue

•

choose different sizes and types of paper

•

print from Windows or DOS applications

•

reset printer defaults

Open the Online Guide

In the Online Guide, you can find

information about:

•

using the printer software

•

loading different types of print media

•

ordering supplies

•

using the manual feeder

•

who to call if you need help

•

VCCI notice

Place the Hagaki, envelopes, greeting

Windows 3.1 or

cards, or index cards in the sheet feeder

Windows for Workgroups

behind the envelope guides.

From the Lexmark 2050 program group,

Place the preferred print side facing you.

double-click the Online Guide icon:

Windows 95

From the Start menu, click Programs.

Click the Lexmark 2050 program group.

Click Online Guide.

Loading the manual feeder

Address

added to

You can print from the manual feeder

show correct

orientation

without removing paper or envelopes from

the sheet feeder.

The manual feeder allows you to print

sheet at a

Before loading the manual feeder, make sure

Manual Feeder is selected as the paper

source in the Lexmark 2050 printer software.

See "How to choose the Manual or

Automatic feeder" in the Online Guide for

Squeeze and hold the left paper guide

more information.

release lever and slide the paper guide

To feed paper, transparencies, Hagaki,

against the left side of the media.

envelopes, or other media

Locate the manual feeder.

Send the job to print.

Top of

Hagaki card

Note: Return the envelope guides to their

original position when not printing

Hagaki, envelopes or other special media.

Close the paper load door.

Before sending a job to print, make sure

you choose the appropriate paper size and

paper type in the Lexmark 2050 printer

software.

For more information, see "How to choose

a media type" and "How to choose a paper

size" in the Online Guide.

When prompted by the printer software,

insert the print media into the manual

feeder until the printer automatically loads

it.

one

time.

Print media

one at a

time:

• Place the preferred print side facing

Manual feeder

you.

• Insert the paper or other media against

the right edge of the manual feeder slot.

• Insert Hagaki so the top of the card

enters the printer first.

• Insert letterhead with the top of the page

pointed down.

• When loading transparencies with a

paper backing, load with the glued edge

pointing down.

• Remove each transparency or glossy

paper from the paper exit tray before the

next one is printed to avoid ink

smearing.

Using the print cartridge

Removing the paper exit

storage unit

tray

If you need to repack the printer in its origi-

You can use the print

nal box, you must remove the paper exit tray.

cartridge storage unit for

open cartridges not currently

installed in the printer.

Insert the extra cartridge into

the storage unit until it snaps

into place.

To remove the print

cartridge, firmly pull it

out of the storage unit

while slightly pulling

Press down firmly here

back on the latch.

Place the printer near the table edge.

Pull the paper exit tray as far out of the

printer as possible. The tray should extend

beyond the table edge.

Press down firmly in the center of the tray

at the point where the tray enters the

printer.

Pull the paper exit tray all the way out of

the printer.

•

This product is designed, tested, and approved to meet strict global safety standards with the use of specific

Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for

the use of other replacement parts.

Storing the setup sheet

Store this setup sheet in the bookholder

behind the printer's paper load door.

Lexmark is a trademark of Lexmark International, Inc., registered in the United

States and/or other countries.

Color Jetprinter is a trademark of Lexmark International, Inc.

Other trademarks are the property of their respective owners.