Avanti WDP69 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Avanti WDP69. Avanti WDP69 15 pages. Avanti products water dispenser wdp69

Imprimer la page

1. Parts and Features

1- Attach the mounting brackets provided, into the pre-drilled holes located at the back of the unit

side panels (see picture 2A) by using the self-tap screws provided.

2- After both brackets are properly installed, use the other end of the bracket to assist in aligning

the holes to be drilled on the wall as follows:

Measure the center of the bracket mounting hole and the ground (see picture 2A), and measure

the distance between the center of both brackets mounting holes (see picture 2B). Both of the

above measurements will give you the exact location for drilling the holes on the wall where the

unit will be secured.

3- Please be aware that when securing these brackets to the wall, different types of bolts may be

used, depending on the different types of wall construction (these bolts are not included).

If you are not able to obtain the measurements as explained above, you can also mount and

secure both brackets to the unit. Move the unit to your desired location and mark the wall using

the holes at the other end of the bracket.