AVANTO 177IC3500P Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AVANTO 177IC3500P. AVANTO 177IC3500P 11 pages. 3500 watt induction range with probe cooking

• If desired, press the "timer" button to program the cooking time. Adjust the desired cooking time by using the
" + " or " - " keys . The time is adjustable from 0 – 180 minutes (1 minute steps). This is an optional timer.
If you do not set the timer, it will default to 180 minutes and then shutoff for safety reasons.
• Press " Probe", and the unit will enter the Probe mode. The Default Temperature will flash on the Screen
("200F"), select the target temperature of the probe by pressing (+) and (-) buttons. The temperature will flash
for 3 seconds after the target temperature of the probe is selected. Touch the "Heat/Hold" to select the Power;
the Default power will flash on the screen ("15"). Then select the heating power of the probe by pressing
(+) and (-) buttons.. The power will flash for 3 seconds after the heating power for heating is selected.
The display will cycle back and forth between the heating power and the selected temperature during the
probe mode.
Cooking time will be indicated at the display by counting down the minutes. When cooking time is finished this
will be indicated by several acoustic signals and the unit will continue to work because the timer is just an audible
timer and does not control the cooking process. After cooking or warming process is finished, always switch the
device off and unplug. All functions can be adjusted manually by pressing the corresponding buttons.
Do not use the appliance if it shows any sign of damage or malfunction, please contact customer service. Do not
place empty cookware on the appliance and do not leave cookware on the appliance for too long to avoid liquid
from cooking off completely. Overheating the cookware will activate the boil dry protection of the device.
The cooling fan will continue to run for 10 minutes after the unit is turned OFF. Do not restrict airflow
to cooling fans.
This unit will automatically shut OFF after 10 continuous hours of use as a built-in safety feature.
You may turn it back ON and continue using it. We recommend only using it for 2-3 hours continuously
at one time to lengthen the life of your unit.
All models are equipped with an "overheating protection" feature. If the temperature of the cooking
surface becomes too hot, the unit will turn off. All models are equipped with a pan detection system
and a 'Safety Off' feature so that when cookware is removed, the unit is switched to Standby Mode
until a pot or pan is placed back on the hob. See below for full list of Error Codes.
www.AvantcoEquipment.com
User Manual
9