Lexmark 2480 - Forms Printer B/W Dot-matrix Référence rapide - Page 16
Parcourez en ligne ou téléchargez le pdf Référence rapide pour {nom_de_la_catégorie} Lexmark 2480 - Forms Printer B/W Dot-matrix. Lexmark 2480 - Forms Printer B/W Dot-matrix 19 pages. Tech notes
Également pour Lexmark 2480 - Forms Printer B/W Dot-matrix : Manuel de démarrage (9 pages), Feuille de configuration (2 pages), Note technique (3 pages)
Imprimer la page
6
Open the operator panel cover to layer 2.
7
Press any paper movement button (LineFeed, Micro , Micro ) to align
the Top-Of-Form you want with the horizontal lines (located on the platen).
This illustration shows the position of the horizontal lines on either side of
the metal platen bar. Use these lines as your reference point when lining
up your Top-Of-Form. The bottom of a printed character will be even with
the horizontal lines.
Top view of printer
Horizontal
line
Paper
Operator
panel
8
Press Set TOF to set and save Top-Of-Form.
9
Close the operator panel cover.
10
To verify the new Top-Of-Form, press Load/Unload to unload the
continuous forms and press Load/Unload again to reload the forms.
The continuous forms load to the current Top-Of-Form setting.
11
Reinstall the ribbon access cover.
12
Press Start/Stop to set printer online.
Align paper with the
horizontal lines on
metal platen bar
Ribbon
cartridge
16
Platen
Front
cover