HIKVISION DS7208HVI-ST Manuel de démarrage rapide - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} HIKVISION DS7208HVI-ST. HIKVISION DS7208HVI-ST 9 pages. Ds-7200hvi-st series dvr
Également pour HIKVISION DS7208HVI-ST : Manuel technique (13 pages), Manuel du produit/de la maintenance (18 pages), Manuel technique (9 pages)
Imprimer la page
Settings Window.
11. To enter the Record
Settings window,
click the Enter
button.
12. Select the Schedule
tab.
13. Click the Edit button. This will open up a new recording
schedule.
14. Check both the
Enable Schedule
and All Day
checkbox. This will
enable the recording
schedule and have it
record continuously all day.
15. Click the OK button.
This will take you
back to the
Schedule tab. To
copy the schedule to
a different channel,
select the channel or all under Copy To and click the Copy
button.
16. Click the Next
button. This will
take you to the
Network Settings
window.
17. To configure
network settings, click the Enter button.
18. Enter the IP Address, Subnet Mask and Default
Gateway.
19. Click the OK button to return to the Setup Wizard.
20. Click the Next button.
This will take you to
the Camera
Management
window.
21. Select Add to add IP
camera, and click OK to return to Setup Wizard.
22. If all the settings are entered as desired, click the Done
2
Quick Start Guide - DS-7200HVI-ST Series DVR
button to finish and exit the Setup Wizard.
Congratulations! You've completed the Setup Wizard. The
next step in the initial setup process is to setup the system
date and time.
Setting Date & Time
It is extremely important to setup the system date and time to
accurately timestamp recordings and events.
To set date and time:
1. Enter General Settings
menu by clicking
Menu> Settings >
General.
2. Enter the correct date
and time under System
Time.
3. Click the Apply button to save the setting.
Live View
Some icons are provided on screen in Live Preview mode to
indicate different camera status. These icons include:
Main Output
Aux Output
Event Alarm: Indicates video loss, video tampering,
motion detection or relay alarm.
Record: Indicates the current channel is recording.
The recording may have been started manually, from a
schedule, and/or triggered from motion or alarm.
Event Alarm & Record
PTZ Control
Settings for a PTZ camera must be configured before it is
used. Before proceeding, verify that the PTZ and RS-485 of