HIKVISION HiLook Series Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION HiLook Series. HIKVISION HiLook Series 18 pages. Smart hybrid light bullet & turret camera
Également pour HIKVISION HiLook Series : Manuel de démarrage rapide (18 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (14 pages), Manuel de l'utilisateur (20 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (17 pages)

Imprimer la page

HIKVISION HiLook Series Manuel de l'utilisateur

1.2.2 Overview of Type II Camera

Enclosure

Figure 1-2 Overview of Type II Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

1.2.3 Overview of Type III Camera

Switch Button

Power Cord

Video Cable

Figure 1-3 Overview of Type III Camera

Note:

Press and hold the switch button for 5 seconds to

switch the video output. Four kinds of video outputs

are available: TVI, AHD, CVI, and CVBS.

2 Installation

Before you start

Make sure that the device in the package is in good



condition and all the assembly parts are included.

Make sure that all the related equipment is power-off



during the installation.

Check the specification of the products for the



installation environment.

Check whether the power supply is matched with



your power output to avoid damage.

Make sure the wall is strong enough to withstand



three times the weight of the camera and the mount.

If the product does not function properly, contact



your dealer or the nearest service center. DO NOT

disassemble the camera for repair or maintenance by

yourself.

2.1

Installation of Type I Camera

2.1.1 Ceiling/Wall Mounting without Junction Box

Ceiling mounting and wall mounting are similar.

Following steps take ceiling mounting as an example.

Steps:

1. Paste the drill template (supplied) to the installation

location.

2. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

3. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

Base

Clip Plate

Main Body