AIRFUSION LD-CD52BN/AB Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} AIRFUSION LD-CD52BN/AB. AIRFUSION LD-CD52BN/AB 19 pages.

TOOLS REQUIRED：

Phillips / Flat head screw driver

Pair of pliers

Adjustable Spanner

Step ladder

Wire cutter

Wiring, supply cable as required by AS/NZS 3000 wiring code.

The ceiling fan must be installed in a location so that the blades are at least 2.1 meters above the floor, and

300mm spacing from the tip of the blade to the nearest objects or walls.

Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 30KG, with

two long screws provided. Ensure at least 30mm of the screw is threaded into the support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures other than

wood, the appropriate screw type MUST be used.

Angled Ceiling Installation

This fan hanging system supports a maximum 20

degree angled ceiling installation.

TOOLS REQUIRED

Fig. 3

Fig. 2