Garden Oasis D71 M80439 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garden Oasis D71 M80439. Garden Oasis D71 M80439 7 pages. Clayton 12' x 10' gazebo with net and bar table

Imprimer la page

Attach a canopy short bar (G) to the canopy

frame (F). For each hole, from upside insert a

medium bolt (Nb) through the bracket of the

short bar (G), the canopy frame (F), a small

metal washer (Ne), and secure with a nut (Nf).

Tighten all bolts and nuts. Repeat procedure for

the remaining three canopy short bars (G).

See Fig. 6. Tighten all bolts and nuts. Cover

with nut caps (Nq).

Attach the canopy fabric (L) to the canopy

frame (F&G) by inserting the bars (G) through

the holes of canopy fabric (L). Then pull down

the wind vent fabric of canopy fabric (L) and

unfold the canopy fabric (L) to the location.

See Fig. 7. NOTE: The middle of the canopy

fabric short side (with "short" lable) towards

middle-length bar of the canopy frame.

Place the assembled canopy onto the top of the

assembled leg posts. Make sure each

crossbar (B,C,D,E) is between two edges of the

canopy (L). Line up the holes, for each hole

insert a medium bolt (Nb) through an U shaped

bracket (Nl), canopy short bar (G), a small metal

washer (Ne) and secure with a nut (Nf). Tighten

all bolts and nuts. Slide each tip end of the short

bar (G) into each pocket. See Fig. 8.

NOTE: Short side of the canopy fabric (with

"short" lable) should on the short crossbar (D&E)

Fig. 6

Fig. 7

Fig. 8

long