Garden Oasis SC-176NSF/4 Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Garden Oasis SC-176NSF/4. Garden Oasis SC-176NSF/4 4 pages. Malden 4 piece seating set

Imprimer la page

ASSEMBLY INSTRUCTIONS

All parts are shrink wrapped together. Remove all

components from the box and place on top of the

box. Carefully cut the wrapping open. Count and

identify all parts.

Attach the back for cushion chair (C) to the seat

for cushion chair (B). Align the holes, insert an

M6 x 25L bolt (Ka) through a metal washer (Kg), the

back for cushion chair (C) and secure into the seat for

cushion chair (B). See Fig. 1. Repeat procedure for

the other side. Do not tighten completely.

Attach the left arm (A2) to the seat (B). Align the

holes, for upper hole insert an M6 x 50L bolt (Kd)

through a metal washer (Kg), the arm (A2) and

secure into the front crossbar of the seat (B). For

lower hole insert an M6 x 50L bolt (Kd) through a

metal washer (Kg), the arm (A2), the bracket of the

seat (B) and secure with a nut (Kh). See Fig. 2. Do

not tighten completely. Then insert an M6 x 60L

bolt (Ke) through a metal washer (Kg), the arm (A2),

the back (C), another metal washer (Kg) and secure

with a nut (Kh). See Fig. 3. Do not tighten completely.

Repeat procedure for the right arm (A1). Securely

tighten all bolts. (Note: the arm label with "left" or "right").

Place the back cushion (F) and seat cushion (G)

onto the assembled chair frame and fasten to the

frame. See Fig. 4. Repeat procedure for the other

cushion chair.

Attach the seat for loveseat (D) to the back for

loveseat (E). Align the holes, for each hole on the side

insert an M6 x 25L bolt (Ka) through a metal washer (Kg),

the back for loveseat (E) and secure into the rear crossbar

of the seat (D). See Fig. 5. Do not tighten completely.

For each hole in the medium insert an M6 x 30L bolt (Kb)

through a metal washer (Kg), the rear crossbar of the

seat (D) and secure into the back (E). See Fig. 6. Do

not tighten completely.

A 2

Fig. 5

Fig. 1

Fig. 3

Fig. 2

Fig. 4

Fig. 6