Avantree BTTC-418-P Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avantree BTTC-418-P. Avantree BTTC-418-P 8 pages. Bluetooth transmitter

Imprimer la page

Clear paired history

Press and hold both + and – simultaneously for 7 seconds. BOTH of the indicators will light up

RED

(looks like PINK) for 5 seconds, indicating that the history has been cleared.

and

Adjust volume

Click or press volume control +/- once to adjust the volume. "Beep" sounds indicate that it has

reached max/min volume level.

Troubleshooting

Not working/ no sound

1. The Audikast Plus and headphones are not connected properly

Re-pair and connect them, once connected successfully, close to A / B turn SOLID BLUE.

2. No audio signal into the Audikast Plus

Please adjust your TV audio output setting as suggested in Point Connect the transmitter to your

TV/audio source or contact your TV manufacturer for support.

Audio delay

Bluetooth headphone is NOT aptX LL supported - If your Bluetooth headphone does not support

aptX LOW LATENCY (e.g. Bose, Beats, Sony), it will work with the Audikast Plus using SBC or aptX

codec and will experience a 70-220ms latency.

Short range / audio cuts

Unstable Bluetooth connection - Clear paired history of BOTH Audikast Plus and headphones.

Wireless signal interference - Move away any potential wireless interference devices, such as the

WIFI router, Apple TV, Chromecast stick, Roku stick, any other RF audio transmitters etc.

Short work range of headphone - Work range is decided by devices on BOTH ends. Please test the

work range of headphone is ok - test it with your smart phone.

Source issue - When you play an internet source from PC, Mac or cellphone, quite often, the audio

cuts are Internet bandwidth / speed related. Please test with local source Bluetooth streaming and

check again.

More FAQs at:

https://support.avantree.com/hc/en-us/sections/360003285831-TC418P-BTTC-418P-BLK-

BLUE