Lexmark 651de - X B/W Laser Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Lexmark 651de - X B/W Laser. Lexmark 651de - X B/W Laser 6 pages. Setup sheet
Également pour Lexmark 651de - X B/W Laser : Manuel de dépannage (13 pages), Manuel de l'utilisateur (12 pages), Manuel d'information (19 pages), Feuille de configuration (2 pages)

Imprimer la page
Lexmark 651de - X B/W Laser Manuel
3
Push the release latch, and then open the front cover.
4
Lift and pull the print cartridge out of the printer.
Warning—Potential Damage: Do not touch the
photoconductor drum on the underside of the cartridge. Use
the cartridge handle whenever you are holding the cartridge.
5
Place the print cartridge aside.
Warning—Potential Damage: Do not leave the cartridge
exposed to light for extended periods.
Warning—Potential Damage: The jammed paper may be
covered with unfused toner which can stain garments and
skin.
6
Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Note: If the paper is not easy to remove, then open the rear
door and remove the paper from there.
7
Align and reinstall the print cartridge.
8
Close the front cover.
9
Close the multipurpose feeder door.
10
Touch Continue.
2

202 paper jam

Touch Status/Supplies to identify the location of the jam. If the
paper is exiting the printer, then pull the paper out, and then touch
Continue.
If the paper is not exiting the printer:
1
Pull down the top rear door.
2
Remove the jammed paper.
3
Close the top rear door.
4
Touch Continue.
230–239 paper jams
1
Touch Status/Supplies to identify the location of the jam.
2
Pull the standard tray out.