Lexmark 840n - W B/W Laser Printer Manuel de connexion - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de connexion pour {nom_de_la_catégorie} Lexmark 840n - W B/W Laser Printer. Lexmark 840n - W B/W Laser Printer 19 pages. Troubleshooting guide
Également pour Lexmark 840n - W B/W Laser Printer : Mise en place (4 pages), Manuel de dépannage (6 pages)
Imprimer la page
Problem
The job prints, but the top
and side margins are
incorrect.
ABC
ABC
DEF
DEF
Ghost images appear.
Gray background prints
Repeating defects appear
Some of the print is cut off
on the sides, top, or bottom
of the media.
Print is skewed, or
inappropriately slanted.
Transparency print quality
is poor.
Action
• Make sure the Paper Size setting in the Paper Menu is correct.
• Make sure the margins are set correctly in your software application.
• Make sure the Paper Type setting in the Paper Menu is correct.
• Replace the photoconductor kit.
• The Toner Darkness setting may be too dark. Change the Toner Darkness setting in the
Quality Menu. See the Menus and Messages Guide on the publications CD for more
information.
• The toner cartridge may be defective. Replace the toner cartridge.
Either the toner cartridge, the photoconductor kit, or the fuser is defective. See "Print quality
troubleshooting" for more information.
Move the guides in the tray to the proper positions for the size loaded.
• Use only transparencies recommended by the printer manufacturer.
• Make sure the Paper Type setting in the Paper Menu is set to Transparency.
Print quality and troubleshooting
Page 4 of 5