Avatoast 184T3300D Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Avatoast 184T3300D. Avatoast 184T3300D 9 pages. Adjustable speed conveyor toaster
Imprimer la page
BEFORE USING YOUR TOASTER
Before cooking anything in your oven for the first time, please follow these simple instructions:
1 .
This conveyor toaster has been designed to continuously produce toasted bread or buns .
The desired toasted color of the product can be adjusted by changing the belt speed of the
conveyor . Depending on installation position, the toasted product can be discharged to the
front or rear of the unit .
2 .
Ensure the support feet are assembled to the unit before commencing operation .
3 .
Thoroughly clean as described in the cleaning section of this manual (page 6) .
4 .
For best results, allow the unit to preheat for 20-25 minutes before use so that the correct
operating temperature can be reached .
USING YOUR TOASTER
184T140
The unit has two controls .
1.
Speed/color control
Determines the length of time the toast or product is in the heating chamber .
The slower the speed, the longer the exposure and the darker the product .
2.
Heat control switch has 4 settings.
"OFF" - In this position, the unit is off .
"STANDBY" - In this position, the conveyor belt will run and both top and bottom
elements will operate at 25% capacity . This mode is designed to keep the unit warm in
quiet periods to reduce start-up time and conserve energy .
"BREAD" - In this position, both top and bottom elements operate at full capacity .
This is the ideal mode for toasting bread .
"BUNS" - In this position, only the top element operates at full capacity .
This is the ideal setting for toasting one side only of a bun .
184T3300B • 184T3300D • 184T3600B • 184T3600D
These units have three controls .
1.
Speed/color control
Determines the length of time the toast or product is in the heating chamber .
The slower the speed, the longer the exposure and the darker the product .
The top and bottom heating elements are independently controlled .
2.
Heat Control Top Element is infinitely adjustable.
"0" is the off position . "6" is the hottest setting . "1" is the lowest setting .
3.
Heat Control Bottom Element is infinitely adjustable.
"0" is the off position . "6" is the hottest setting . "1" is the lowest setting .
As described above, product appearance or color is dependent on conveyor speed and type
of product . These other factors may also affect the toasting color:
i . Moisture content of the product .
ii . Sugar content of the product .
iii . Initial product temperature .
5.