Makita HM1801 Manuel d'instruction - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Makita HM1801. Makita HM1801 12 pages. Electric breaker
Également pour Makita HM1801 : Manuel d'instruction (10 pages), Manuel d'instruction (8 pages), Manuel d'instruction (20 pages), Manuel d'instruction (12 pages), Manuel d'instruction (8 pages), Informations techniques (18 pages)

1. Hex wrench 5

2. Motor housing cover

1. Brush holder cap

2. Screwdriver

1. Cap

2. Wrench 23

1. Hammer grease

Use a hex wrench to remove the motor housing cover.

006203

Use a screwdriver to remove the brush holder caps. Take out the worn carbon

006204

brushes, insert the new ones and secure the brush holder caps.

Lubrication

006205

This tool requires no hourly or daily lubrication because it has a grease-

packed lubrication system. It should be relubricated after every 6 months of

operation. Send the complete tool to Makita Authorized or Factory Service

Center for this lubrication service. However, if circumstances require that you

should lubricate it by yourself, proceed as follows.

First, switch off and unplug the tool.

Remove the cap using a wrench 23, then replenish with fresh grease (60 g).

006206

Use only Makita genuine hammer grease (optional accessory). Filling with

more than the specified amount of grease (approx. 60 g) can cause faulty

hammering action or tool failure. Fill only with the specified amount of grease.

Reinstall the cap and secure with the wrench.

To maintain product SAFETY and RELIABILITY, repairs, any other mainte-

nance or adjustment should be performed by Makita Authorized Service Cent-

ers, always using Makita replacement parts.