Garden Treasures PF1600UV Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Garden Treasures PF1600UV. Garden Treasures PF1600UV 3 pages. Pressurized biological filter with uv light

Imprimer la page

Assembly Instructions

Estimated Assembly Time: 20 minutes

1. Remove the filter assembly from the package and untie

the power cord.

2. Place the filter on a level surface.

3. Press the handle and turn it until it is in between the

"CLEAN" and "WORK" position.

4. Use a Phillips screwdriver to remove the four (4) screws

around the handle and the one screw at the back of top

cover. Lift cover straight up to remove it from the filter

head.

5. Twist the UV cap counterclockwise and pull the UV lamp

socket out.

6. Insert the UV bulb to the UV lamp socket and re-

assemble the UV lamp socket and top cover in reverse

order.

7. Once the top cover is secure, press and turn the handle

to the "WORK" position.

8. Connect one end of a length of 3/4 in. tubing (not

included) to the nozzle marked "IN", and the other end to

the pump (not included). (Fig.1)

9. Connect another length of tubing to the nozzle marked

"OUT". Attach the other end of the tubing to a spitter,

waterfall, fountain or other water feature of your choice,

directing the flow of water back into the pond. (Fig.1)

10. The filter is not designed to be submerged. Place the

filter in a clean, dry area.

11. Connect the lamp power cord to the power source.

13. To operate the pressurized filter, the handle should be in

the "WORK" position (Fig.2).

14. To clean the pressure bucket, press and turn the handle

to the "CLEAN" position (Fig. 2).

15. To optimize the UV clarifier performance, the ideal flow

rate of the pump should be 792 gph or less with a

minimum of 20 gph.

Important Note:

This product is designed to prohibit operation unless it is

fully assembled with the UV lamp base screwed completely

into the lamp housing. UV rays are harmful to your eyes and

skin. Do not attempt to operate this product unless the UV

lamp is completely assembled within the lamp housing.

Self Cleaning Function

The pressurized filter is equi

pped with a specially developed backwash

cleaning system and does not need to be disassembled to be cleaned.

Turn the power off to the pump connected to your pressurized filter.

Disconnect your water feature tube attached to the "OUT" nozzle and

Move the handle from "WORK"' to "CLEAN" and switch your pump on.

The water flow is now reversed through the filter media.

The solids are expelled from the pressure filter via the UV

expelled and clear water is discharged from filter.

attach a separate waste tube leading to your waste water collection.

chamber and waste connection. Continue the cleaning process until all the dirt soilds are