Gardena 14632 Manuel de l'opérateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} Gardena 14632. Gardena 14632 14 pages. Battery lawnmower

Imprimer la page

v Only start the mower with an upright standed handle.

v Do not overload the mower.

v Never operate the product when you are tired, ill or under the influence of

alcohol, drugs, or medicine.

2. ASSEMBLY

DANGER!

Cutting injury due to the blade!

Risk of cut injury due to accidental starting.

v Use gloves.

v Wait for the blade to stop.

v Remove the safety key.

2.1 To assemble the lower handlebars [ Fig. A1 ]:

1. Push both lower handlebars

(1)

Make sure that the handlebars are completely in place and the holes of

the handlebars are inline up with the holes of the openings in the

mower.

(3)

2. Put both wing screws

in the holes of the openings

3. Tighten both wing screws

(3)

Make sure that the wing screws are completely tightened.

2.2 To assemble the upper handlebar [ Fig. A2 ]:

The upper handlebar

(4)

can be assembled to the lower handlebars

3 positions to adjust the height.

Working position:

2.2.1

v Adjust the height of the handlebar so that you are in an upright position

when using the mower.

Position

Lower hole

Middle hole

Upper hole

1. Put the upper handle

(4)

on the lower handlebars

Make sure that the handles are completely in place and the desired

holes are inline.

2. Push both screws

(5)

through the holes.

3. Put both washers

(6)

and both wing nuts

(7)

4. Tighten both wing nuts

2.3 To attach the cable to the handlebar [ Fig. A3 ]:

1. Attach the clamps

(9)

to the holes provided for them on the

(1)

handlebar

2. Attach the cable

(8)

to the clamps

Make sure that the cable is not trapped between the handlebar and

the mower, otherwise the cable may be damaged.

2.4 To assemble the grass catcher box [ Fig. A4 / A5 ]:

(10)

1. Slide the tongue

from behind into the connectors

catcher box until the connections audibly engages.

Make sure that all connectors are engaged.

2. First push the catcher box handle

cover

(13)

3. Then push the catcher box handle

cover

(13)

until the connections audibly engages.

Make sure that all connectors are engaged.

3. OPERATION

DANGER!

Cutting injury due to the blade!

Risk of cut injury due to accidental starting.

into the openings

(2)

in the mower.

(2)

in the mower.

Height of the handle above the ground

91 cm

94 cm

97 cm

(1)

(7)

on the screws

(5)

(9)

on the handlebar

(1)

(11)

on the grass

(12)

at the back into the catcher box

(12)

at the front into the catcher box

v Use gloves.

v Wait for the blade to stop.

v Remove the safety key.

3.1 To charge the battery [ Fig. O1 / O2 / O3 ]:

CAUTION!

The voltage of the power source must match the voltage specified on

the rating plate of the charger.

v Note the mains voltage.

For the GARDENA Battery Mower Art. 14632-55 there is no battery

and no charger in the scope of delivery.

Thanks to the intelligent charging process, the charge condition of the

battery is automatically detected and then charged up with the optimal

charge current depending on battery temperature and voltage.

In this way, the battery is treated with care and remains permanently fully

charged when it is stored in the charger.

(18)

1. Open the cover

2. Push the locking button

(D)

holder

3. Connect the battery charger

4. Slide the battery charger

When the battery charge indicator

the battery is being charged.

(1)

When the battery charge indicator

nently green the battery is completely charged

(Charging time, see 7. TECHNICAL DATA).

5. Examine the charge status regularly while you charge.

(B)

6. When the battery

connected from the charger

3.2 Meaning of the indication elements:

3.2.1 Indication on the charger [ Fig. O3 ]:

Flashing of the Battery

The charging procedure is indicated by flashing of the battery charge

(Lc)

Charge Indicator

indicator

Note: The charging procedure is only possible when the battery

temperature is within the allowable charging temperature range,

see 7. TECHNICAL DATA.

Continuous Lighting

Continuous lighting of the battery charge indicator

of the Battery

the battery is fully charged or that the temperature of the battery is

(Lc)

Charge Indicator

not within the allowable charging temperature range and can therefore

not be charged.

When the battery is not inserted, continuous lighting of the battery

charge indicator

socket outlet and that the battery charger is ready for operation.

3.2.2 Battery charge status indication

[ Fig. O4 ]:

After starting the product, the battery charge status indication

is displayed for 5 seconds.

Battery charge status indication

(L1)

(L2)

(L3)

and

light green

(L1)

(L2)

and

light green

(L1)

lights green

(L1)

blinks green

If the LED

(L1)

blinks green, the battery must be charged.

(Wp)

If the error LED

is lighting or blinking

see 6. TROUBLESHOOTING.

3.2.3 Eco button [ Fig. O4 ]:

The Eco mode reduces the motor speed to 3100 rpm for a maximum

battery lifetime.

3.2.3.1 To activate the Eco mode:

v Push the Eco button

The Eco mode is activated and the LED

(D)

of the battery holder

(A)

and remove the battery

(B)

(C)

into a mains socket.

(C)

(B)

onto the battery

(Lc)

at the charger blinks green

(Lc)

at the charger lights perma-

is completely charged, the battery

(C)

(Lc)

indicates that the mains plug is inserted in the

(P)

on the product

Battery charge status

67 – 100 % charged

34 – 66 % charged

11 – 33 % charged

0 – 10 % charged

(e)

on the control panel.

(Le)

lights.

from the battery

(B)

can be dis-

(Lc)

indicates that

(P)