Gardena 36 A Li Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 36 A Li. Gardena 36 A Li 16 pages. Battery rechargeable lawnmower
Également pour Gardena 36 A Li : Manuel d'utilisation (17 pages), Manuel d'utilisation (11 pages), Manuel d'utilisation (16 pages)
Imprimer la page
56
9. Troubleshooting
Problem
Motor will not start / motor stops
while working
Abnormal noise
Excessive Vibration
Poor grass collection
Lawn cuts unevenly
Lawnmower becomes
heavy to push
20
All manuals and user guides at all-guides.com
3. Using a soft brush, remove grass clippings from the vision window
56
.
4. Wipe over the surface of your lawnmower with a dry cloth.
IMPORTANT:- Never use water for cleaning your lawnmower. Do not
clean with chemicals, including petrol, or solvents - some can destroy
critical plastic parts.
Important :
Unplug the safety key and remove battery.
IMPORTANT:- Beware of sharp blade ! Wear Gloves
Possible cause
Safety key is not inserted
Battery is not inserted
Red LED light flashing
Battery is not charged
Green LED and Error LED
both lights flashing
Motor temperature is high
Yellow LED and Error LED
both lights flashing.
Battery temperature is high
Red LED and Error LED
both lights flashing
Controller temperature is high
Error LED light flashing
Overcurrent/motor is blocked
Error LED light on continuously
Controller failure
Screws/components loose
Blade fitted incorrectly
Foreign bodies on the blade
Blade very dirty
Blade damaged
Cutting height too low
Grassbox is full
Grass discharge chute is blocked/
grass has collected under deck
Blade is blunt
Grass is too long
Grass is too long
Remedy
Insert safety key (see 5. Initial
Operation)
Insert Battery (see 5. Initial
Operation).
Charge Battery (see 5. Initial
Operation).
Put product out of the sun,
Wait 15 minutes for product
to cool down and re-start.
Put product out of the sun,
Wait 15 minutes for product
to cool down and re-start.
Put product out of the sun,
Wait 15 minutes for product
to cool down and re-start.
Clear obstruction and re-start.
Product to be checked by
GARDENA Service.
Tighten screws or product to be
checked by GARDENA Service.
Product to be checked by
GARDENA service.
Remove foreign bodies.
Clean blade.
Product to be checked by
GARDENA Service.
Raise cutting height
(see 6. Operation - Cutting
height adjustment).
Empty grassbox
(see 6. Operation -
Grassbox full window).
Remove grass
(see 8. Maintenance - Cleaning).
Product to be checked by
GARDENA Service.
Raise cutting height
(see 6. Operation - Cutting
height adjustment)
Raise cutting height
(see 6. Operation - Cutting
height adjustment)