Gardena 4025 Manuel d'utilisation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Gardena 4025. Gardena 4025 15 pages. Accu rechargeable cylinder lawnmower
Également pour Gardena 4025 : Manuel d'utilisation (15 pages), Manuel d'utilisation (15 pages), Manuel d'utilisation (15 pages)
Imprimer la page
Storage :
The cylinder lawnmower and the Accu must not
be stored at more than 45 °C or when exposed
to direct sunlight.
3. Assembly
Assembling the handle :
1
2
3
0
B
9
D
5
6
D
4
C
4. Function
Mowing correctly :
1. Insert lower part of bottom upright
into upright holders
secure with the screws
2. Push connector
into upper part of bottom upright
3. Insert threaded rod
lower parts of central upright
upper part of bottom upright
connector
4. Slide threaded bearing
clamping lever
5. Screw clamping lever
threaded rod
A
6. Move clamping lever
connector
clamping lever
9
7. If clamping lever
lock, screw another turn onto
7
threaded rod
until clamping lever
connector
1
8. Push the screws
upper handle
handle sections
the 2 wing nuts
The safety lock
on the right in the direction of travel.
9. Fix the motor cable
D
clips
To produce a well-maintained lawn we recommend cutting the
lawn once a week if possible. The lawn becomes thicker if cut
frequently.
Relatively long cut grass ( > 1 cm) must be removed so that the
lawn does not become yellow and matted.
After relatively long intervals between mowing (holiday lawn), up
to max. 12 cm, first of all cut in one direction with the cutting height
as high as possible, then cut in the crosswise direction at the
cutting height required.
Ideally, the Accu should be stored below
25 °C.
2
up to stop and
3
.
4
from underneath
6
from left through
1
4
right up to the stop.
8
into
7
.
7
onto
6
approx. 4 turns.
7
onto
4
and check whether
7
locks.
7
does not yet
6
. Repeat procedure
7
locks on
4
.
9
through the
0
and the middle
5
and secure with
A
.
B
of the handles
C
to the handle with the two cable
.
1
7
1
8
.
5
,
and
4
7
0
must be
6
7
15